Can the six axis LED dispensing machine improve the efficien
作者:点胶技术分析 日期:2017-11-23 18:06 浏览:
The modern LED package work often use LED dispensing machine to complete the development of LED packaging technology is rapid, dispensing machine six axis LED dispenser was born in this demand. And then whether the six axis LED dispensing machine can meet the LED packaging needs and better? Let's start with the traditional LED dispenser.
For ordinary LED dispensing machine, its composition is divided into three parts: control system, execution system, transmission system of three components. The control system is the core and backbone of dispensing machine, the other two systems bear the main function is to control the dispensing machine to set parameters and send commands to adjust each dispensing, dispensing detail work, thus to complete the dispensing work is a part of the dispensing machine can not be missing.
The transmission system is composed of three parts, dispensing valve, pump and the dispensing tube are connected together, the main work is to adjust the transmission of glue, glue glue volume and velocity, to ensure the quality of dispensing, dispensing machine mechanical transmission LED way transmission glue.
The execution system is also composed of three parts. Respectively: mechanical arm, main rod and motor, the general LED dispensing machine, the use of step motor to transmit power and command. The simpler the executive system is, the last step in implementing the dispenser is the final dispensing process, which affects the important steps of the final dispensing result.
Six axis LED dispensing machine is in the traditional LED dispensing machine and so on, with the word structure and the traditional LED dispensing machine structure as the main difference is in the implementation of the system. Traditional LED dispensing machine uses XYZ dispensing positioning system, only a single mechanical arm drive, and the six axis LED dispenser has two systems, square dispensing system and dual axis product rotation system.
The square dispensing system consists of three mechanical components on the X axis, the Y axis and the Z axis, and the upper rotation mechanism of the X axis. The remaining dual axis product selection system is composed of a Y axis and a Z axis running module, and each shaft has a servo motor. The circulation efficiency can be improved greatly in the dispensing efficiency of the system.
