LED round bulb dispenser is a LED bulb dedicated to dispensing equipment, due to the characteristics of the material placing groove for dispensing round objects in all kinds of small, only need to perform all kinds of irregular dispensing work through programming can. The special LED cylinder dispenser as the action of compressed air, compressed air will automatically be squeezed out of the glue dispensing valve to glue effect, this is the aerodynamic characteristics of the cylinder, so how to properly use?

The cylinder will carry the circular work dispensing machine pneumatic control, the air pressure will be displayed on the pressure gauge, pressure gauge can be readily detected by the cylinder pressure, the throttle valve is an important tool to adjust the LED dispensing cylinder, the cylinder can be adjusted at any time of the work value, need to be connected with the throttle valve and speed joint in order to achieve at any time pressure to make the cylinder can be adjusted directly controlled step-down recovery, if the boost pressure can directly before adjustment.

Sometimes LED circular dispensing machine cylinder will appear the problem of insufficient power output, which is mainly the internal piston stuck, by adjusting the pitch of the eccentric horizontal can of course it is also possible to meet, lubrication of the friction caused by the lack of large power shortage, carefully check the oil mist lubrication is out of action.