What's easy to do with the use of a glue dispenser in the op
作者:点胶技术分析 日期:2018-01-12 19:01 浏览:
In the optical fiber industry, we can use fiber optic dispenser, desktop automatic glue dispenser and so on. The tabletop glue machine can also be called the desktop dispenser, which can automatically realize the arc, point, circle and irregular curve. The optical fiber dot glue selects the desktop type glue function to improve the production efficiency, the glue dispenser has the PLC programming operation, the glue dispenser can make the glue according to the PLC programming. So what are the problems when using a desktop dispenser?
1. Plugging of glue mouth
When the power is turned on, it is found that the glue nozzle of the glue dispenser does not produce glue. It may be because the cleaning is not cleaned and the glue is solidified in the glue mouth of the glue machine. Or the glue is stained with residue, and the residue plugging the glue mouth at the time of the glue, affecting the effect of the glue. If the glue is solidified in the glue mouth, the glue machine can be stopped and the glue dispenser is changed. If there is residue in the glue, the vacuum system is used, the glue is replaced, and the glue nozzle of the glue dispenser is cleaned.
2. The size of the glue is not uniform
The reasons for the unevenness of the tabletop glue dispenser are as follows: the backpressure pressure is too small and the viscosity of the glue is high. If the pressure is too small for the dispenser, it is easy to break glue and leak point when dispensing. It will not only affect the quality of the product, but also affect the beauty of the product. When the viscosity of the glue is higher, the drawing phenomenon is easy to appear, which affects the dispensing effect of the glue dispenser. When debugging the glue machine, it is best to adjust the glue pressure according to the glue and the speed of the glue. If the viscosity of the glue is larger, the glue speed and back pressure can be adjusted well, and the drawing phenomenon can be avoided.
The above two points are the most easy to appear on the tabletop glue dispenser. It is best to use a cleaning machine every time after the use of the dispenser. It is convenient for the next use.
