Good cleaning of the peristaltic LED dispenser with PU glue
作者:点胶技术分析 日期:2017-12-07 17:36 浏览:
In many glue, the number of low viscosity glue is very large, and some of low viscosity glue has strong adhesion. Therefore, many dispensers cannot use low viscosity glue. Of course, there are some special dispensing machines in the dispensing market. The peristaltic LED dispensing machine is a dispensing equipment that can be dispensed with PU glue. Does the maintenance of PU glue creep LED dispensing machine take a lot of time?
If you want to know the speed of the automatic cleaning machine, we must first understand the driving mode of the PU glue peristaltic LED dispenser. There are four kinds of driving methods commonly used in the dispensing machine, which are pneumatic, electric, mechanical and hydraulic drive. The most commonly used are two kinds of pneumatic drive and electric drive. In the four ways, the air pressure drive precision is the lowest, the driving speed is the slowest, the mechanical drive precision is the highest, and the driving speed is the fastest.
Because the transmission system of peristaltic LED dispensing machine installed inside the screw linkage system, thus dispensing machine is used for dynamic mechanical drive, can fast clean, so the internal peristaltic LED dispensing machine cleaning and maintenance time is shorter than the general dispensing equipment, the cleaning efficiency and maintenance difficulty are greatly reduced.
Besides, the peristaltic LED dispensing machine also needs external maintenance, that is, to clean up the shell of dispensing machine, and to replace or lubricate vulnerable parts. The cleaning of the shell only needs to be cleaned with dust-free gauze, and the lubrication and replacement of the vulnerable parts need to check these components one by one, which takes much longer time than shell scrubbing.
