Double head dual station LED package dispenser need to pay a
作者:点胶技术分析 日期:2017-11-21 15:07 浏览:
Double head double station LED dispensing machine dispensing work should be very careful, once there is a problem, it is very troublesome, then what should we pay attention to when dispensing in peacetime to avoid these accidents or alleviate the aggravation of the situation.
We have to carefully check each agency double station LED package dispensing machine is normal before starting, especially between the important working parts transmission and execution system to check whether need lubricating oil lubrication, prevent the double station LED package dispensing machine running in glue flow and the movement of the manipulator is not consistent and set the parameters of the control system, the precision, dispensing glue volume will be a grave mistake. If the effect is small, the product can barely be used, but it is not beautiful enough. If the quality of the product is slightly more stringent, it can not be used, and serious cases may lead to leakage, breaking glue, drawing and so on, which seriously affect the dispensing process.
Also check double head dual station LED package dispensing machine between the tight connection, otherwise there may be leakage, can only stop to fully check the dispensing machine each part of the connection.
LED packaging glue dispensing to ensure the tightness of the dispensing valve in the work, if careless words, resulting in pipeline transmission of air into the pump may be the glue, the outside air is pressed into the glue dispensing needle to call out the glue will bubble, though it doesn't affect the amount of the dispensing point of glial, but the effect is not very good.
When the double head and double position LED package dispenser is circulating, the actual parameters of the control system should be observed at any time. If there is deviation, must promptly correct errors, one step deviation, the following all dispensing will also be deviation.