Is the common cleaning method suitable for multi head LED pa
作者:点胶技术分析 日期:2017-10-31 16:46 浏览:
The dispensing machine used for a long time on the need for cleaning and maintenance, especially multi LED package dispensing machine, the dispensing device with other types are not the same, is driving several dispensing needle with a mechanical arm, dispensing needle clogging or other problems, dispensing efficiency and quality will drop, so I want to ensure a long LED package dispensing machine production, the need for regular cleaning and maintenance work, ensure the continuous working time of dispensing machine.
There are three ways of cleaning led dispensing dispenser:
The first is the traditional way of cleaning chemicals used for cleaning, can thoroughly clean the bull LED package dispensing glue, and relatively low cost, agent dichloromethane and chloroform two kinds of compounds were mixed with chemical cleaning, and then used for cleaning the dispensing substrate, but the use of chemical substances for environmental pollution, can not use again, slowly eliminated.
Second kinds of high pressure cleaning method, using this way long cleaning LED package dispensing machine is also a good way, but there are limitations, the glue solidification degree is very high, high pressure water cleaning requires a large amount of water and time, this is a waste of water resources and working time, although the environmental pollution is reduced, but also not to the cleaning the dispensing scheme.
The third is to use environmentally friendly cleaning solvent cleaning cycle, not only effectively cleaning glue to long LED package dispensing machine, and can be recycled, the cleaning technology development time is not long, the manufacturing technology is not mature, so the cost may be higher than the two, this cleaning method will not waste resources and pollute the environment, but also now the most appropriate cleaning long LED package dispensing machine.
