Two component AB filling glue LED dispenser
作者:点胶技术分析 日期:2017-11-24 18:19 浏览:
LED glue dispensing machine is generally used for bulb lamp, because the bulb needs top package, so use a lot of glue, glue production machine, although the speed will be faster, but requires a lot of glue, it will drag after dispensing speed, using glue production mode is conducive to the bulb the lamp production, but also to enhance the production efficiency and products for the accuracy is relatively low.
Two component is that you can use two different types of mixed glue dispensing, bulb package with anti leakage and curing effect for a glue, glue dispensing alone can not complete such task, two will be able to play such a role with glue mixing, two-component AB glue dispensing machine is LED in the bulb of custom.
Whether it is or what kind of glue dispensing machine, dispensing equipment selection in an industry which, cross line using the LED dispenser can also, but the dispensing quality may be worse, if the enterprise can find the quality, can also be used in such a way that can reduce more cost.
If the company is specializing in the production of LED tube or bulb and so on, you need to select the LED glue dispensing machine, because the two components of AB LED glue dispensing machine in addition to the lamp in the dispensing ball, can also make the glue in the LED tube, said before the glue required precision is relatively low, so LED glue dispensing machine can glue operations in these industries.
A two-component AB LED glue dispensing machine production speed faster, using three sets of motor as the main power output, this glue speed will slow, if there are special requirements of what the system can be directly with limited communication in Shenzhen, customized two-component AB is one of the most suitable glue LED dispensing machine.
